Archive

Archive for the ‘WordPress’ Category

Why aren’t my feeds being published? | RSS Graffiti

August 11, 2012 1 comment

Why aren’t my feeds being published? | RSS Graffiti.

Why aren’t my feeds being published?

There are a few reasons your posts might not be publishing.

RSS Graffiti does not check your feed immediately after setting up a new feed source. The frequency with which we check your feed depends on the level of system traffic.

RSS Graffiti

RSS Graffiti

Are there new posts eligible for publishing? RSS Graffiti will not go back and publish old posts unless you explicitly change the cut-off date/time in the advanced tab of the source settings window.

Make sure your feed is a valid RSS or Atom document. Each item in your feed must include an element containing a valid datestamp as well as an element containing a valid http:// URL. You can validate your feeds here.

If you still can’t figure out why your feeds are failing to publish, ask a question in our Community Support Forum.

See Also:

http://blog.rssgraffiti.com/

WordPress Blog not posting to Facebook « WordPress.com Forums

August 11, 2012 Leave a comment

Blog not posting to Facebook « WordPress.com Forums.

Blog not posting to Facebook

  1. Blog not posting to facebook. I’ve gone through the process of disconnecting, removing the Facebook app, and reconnecting, but it’s still not auto-posting to my fanpage. Is there anything else you would recommend to get this to work?
    Blog url: http://robertreviewsstuff.wordpress.com/

  2. I’m having the same problem. Worked a couple of times when I first set it up, hasn’t worked since.

  3. Aside from reconnecting I have no solutions to offer you.
    http://en.support.wordpress.com/publicize/#reconnecting-facebook

    I can suggest two alternatives. You can use Networked Blogshttp://www.networkedblogs.com/ or RSS Grafitti http://www.facebook.com/RSS.Graffitifor posting to Facebook walls if you prefer. RSS Graffiti periodically checks the RSS/Atom feeds that you specify and posts any new entries it finds to the Facebook Walls that you specify. You can get any feed written on any wall (Facebook Profiles, Fan Pages, Groups, Events and Application Profile Pages). In fact, multiple feeds to multiple walls. You choose the combination.

Zemanta Puts Unwanted HTML Comments In Pre-Formatted PHP Code (Sourcecode) In WordPress Posts

April 9, 2012 4 comments

PROBLEM:

I  have recently determined through trial and error and process of elimination that Zemanta is responsible for adding extraneous HTML comments to my pre-formatted (with “pre” tags) PHP code that I have placed between “sourcecode” tags to activate WordPress.com’s built in programming code syntax highlighting.

Here is a screenshot (fig 1.) that demonstrates the problem:

codeslayer2010 blog with zemanta extraneous html comment errors

fig. 1

See, all that green is what commented my code out and made it so it doesn’t display correctly.

I am not totally sure Zemanta is to blame, but it seems the most likely culprit.  Here’s why:

  1. Identified 3 possible suspects: Zemanta, WordPress.com proofreading, and pasting pre-formatted code in Visual view instead of HTML view.
  2. Disabled Zemanta and retested –  problem remained.
  3. With Zemanta disabled, disabled proofreading as well.  No change.
  4. With Zemanta and proofreading disabled, went Edit>HTML View.  In each instance where I had posted code, deleted all the code from in between “sourcecode” tags.
  5. Re-copied and pasted code from each original PHP file.  Re-tested: Worked!  Syntax highlighting works properly now.  Made multiple edits to both code and text, updated and viewed the post — Good to go every time.
  6. Re-enabled Zemanta, made a test edit, saved and previewed the new post.  Everything is messed up again!  This is why I think Zemanta is the issue.

SOLUTION:

The solution I have come up with is this.

  1. If you want to use Zemanta, do so before adding any preformatted code or sourcecode tags.  Always turn Zemanta off when you are done using it.
  2. DO NOT, (under any circumstances) have Zemanta enabled if you have preformatted PHP code in your blog.  Chances are, Zemanta will mess your code up and you will have to re-paste your code again.  During my tests, I have had to paste all my sourcecode from scratch 3 times and let me tell you — it gets very tedious and wastes valueable time.
  3. Always paste sourcecode in HTML view only.

These are my recommendations based on my personal experience with this issue.  I’d love to hear from anyone else who is having similar issues.  Please let me know if this solution worked for you!

– CodeSlayer2010

Delete All Trackbacks on WordPress Blog & Disable Self Pings

Categories: .Of Interest, WordPress

Q & A: How To Schedule Publishing Of Multiple Posts in WordPress?

Hi folks,

I’ve been receiving some tech questions lately so I decided I’d start answering them on the blog so others can benefit as well.

Our next question is from Nadine in Houston, TX:

Question:

How do I schedule multiple posts in WordPress.com?  For instance, let’s say I want to make a queue or stack of posts, and the set up a rule that automatically publishes each post at certain intervals.  So, if I write 10 posts before going on vacation, I can set it up so that the next  one in the queue will publish itself to my blog every 3 days, or on some similar schedule.  I know you can schedule each post individually in WordPress.com by manually configuring the date on each post, but I’m looking for some automation to save time and do stuff in bulk.

Answer:

Great question Nadine.  Unfortunately, in WordPress.com you are only able to schedule posts one at a time.  On the other hand, if you self-host a WordPress.org-based blog then you have some more options.  One plugin that has high ratings is Editorial Calendar.  This gives you a calendar schedule view, you can schedule for multiple authors, drag and drop between days.  Overall, this one really gives you a lot of control options.  If you are hosting your own site, I’d say give it a try.

-Kristobaldude

Professional Development Journal: 2012-02-27

February 28, 2012 Leave a comment

Just a quick update:  Last night I began and completed through Chapter 3, Lynda.com‘s WordPress 3 Essential Training.  Total time was about 3 hours.  Tonight, my goal is to finish at least another 3 chapters.  My goal is to finish this course by the end of the week! 🙂